Quinn Aud
From ITS Wiki - Information Technology Services - University of Rhode Island
Contents |
Location
First Floor of Quinn Hall
Contact
Classroom Media Assistance, Lower Level Library (LL4), 401-874-4278, cmaking@etal.uri.edu
For reservations, Reserving Kingston Facilities.
Access
Important Notes: Card Activation
This auditorium is accessed with a card swipe lock. Before you can enter, you must have your URI ID card authorized for
access to this room.
Test your card at least 1 business day prior to your first class meeting. If your card does not work, contact Facilities Services Access Control Office at 874- 4577, or e-mail at access@etal.uri.edu.
Auditorium Light Switches
One light switch is located on the wall to your right as you enter the room. Additional light switches that control a set of lights in the auditorium and the stage lights are located on stage at top of the right side steps.
Projector Screen Control Switch Also located at the top of the stage steps. This switch raises and lowers the projection screen. The screen must be held s the screen fully lowers and as it fully rolls into its casing.
Media Rack
A key lock secures the media equipment rack. The key is assigned after room media orientation. Media equipment and orientation must be reserved on the CMA Equipment Request web form. Classroom Media Assistance Office is on the lower level of the library, LL4.
Drawer - Holds the remotes for media devices
- Installed LCD Projector
The projector hangs stationary from the ceiling in front of the projector screen. Its video feed and power switch is controlled by the Extron Switcher (see "Turning Projector On/Off" and "Switching Inputs"). Do not operate manually.
- Ethernet Port
Connects your laptop to the URI internet. Active port is marked by a red dot.
NOTE: The Display Power ON and warm-up cycle time for the projector is 2 minutes. Any attempt to power OFF within this time period will crash the system. The warm-up time is done when the green light on the projector is no longer blinking. The projector can be re-powered ON- if needed again- after the 2-minute cool-down cycle.
IMPORTANT NOTE: Do not try to Power On/Off the projector prior to the 2-minute warm-up and/or cool down cycle.
WHEN DONE: Press the green Display Power button for 2 seconds. The Power Display button will not be lit. The last media source button used will remain lit.
3.DVD - Video signal is routed to the projector. To control the DVD, use the buttons on the face of the DVD player or the DVD remote control stored in the Media Rack (5) Drawer. Manually power On/Off. Volume Control knob is on right side of the Extron Switcher panel. 4. VCR - VHS Video signal is routed to the projector. To control the VCR, use the buttons on the face of the VCR player, or the VCR remote control stored in the Media Rack (5) Drawer. Manually power On/Off. Volume Control knob is on right side of the Extron Switcher panel. 5.Cassette - Audio signal from the Cassette Player is routed to the sound system. To control the cassette, use the buttons on the face of the player. Projector need not be on to operate. Manually power On/Off. Volume Control knob is on right side of the Extron Switcher panel. 6. Document Camera - Video signal is transmitted through the VGA cable marked # 6 stored in the media rack. Use Input 6 located on the side of Media Rack to connect the document camera to the Extron Switcher.
Document Camera is not stored in the auditorium. It must be reserved on the CMA Equipment Request web form, picked up and returned after use.
Note: There is no audio included with this input.
7. Video - These inputs connect alternative video sources (e.g. Video Camera, etc.).
If there are any questions about how to hook up your auxiliary device, ask Classroom Media Assistance.
Using the Wireless Microphone:
The wireless microphone unit is stored in the drawer in the media rack. The microphone receiver is configured to route the audio signal through the sound system speakers. Attach the microphone to lecturer's lapel or collar. The power switch is located on top of the unit. Extra batteries are stored in the drawer.
Remember: Turn OFF the Microphone when done. Return it to the media rack drawer.
Locking Up Procedures
- 1. On the Media Link Controller, press the "Power Display OFF" button to turn Off the projector.
- 2. Remove your media and Power Off the media machine used. Power Off your laptop. Return cables to the floor box and/or media case.
- 3. Power OFF microphone and return to Classroom Media Assistance Office in Chafee 217.
- 4. Turn the classroom Lights OFF. Shut all Exterior Doors.
- 5. Swipe-lock the main door using your URI ID card. The card-reader light will blink green when in locked mode.
Security
Ask students waiting for the next class to remain outside the classroom until their instructor arrives. You as Instructor are responsible for the room's security during your class time, so please lock up!
